基于最小均方插值的码元同步算法研究

从软—硬件协同设计的角度出发 ,提出了软件无线电系统中码元同步的一种实现方案。该方案以信号插值为理论基础 ,用软件实现整个码元同步过程。其特点是以估计性能更佳的最小均方滤波器替代传统的多项式插值滤波器 ,并利用软件实现时可以进行大批量数据缓存的优势 ,提出能量检测算法 ,以克服半码元周期传输延迟时出现的高误码率问题     

后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

线导鱼雷导引弹道的动力学分析

通过线导鱼雷常用导引方法—三点法、前置角法导引弹道的动力学分析 ,推导出不同方法下鱼雷旋回速率的解析表达式 ,并通过数字仿真对鱼雷线导导引弹道动力学特性进行探讨 ,明确了线导鱼雷导引弹道特性与导引方法之间的关系 .     

气体化学反应速率的 DSMC 方法

为预报化学反应过程,应用ＤＳＭＣ方法研究了双原子分子的离解反应,讨论了高温情况下（Ｔ～Ｅａ／ｋ）采用由实验测定得到的反应速率与气体温度间Ａｒｒｈｅｎｉｕｓ经验关系式的可靠性问题,分析了振动热非平衡效应对于离解反应速率的影响,给出了由ＤＳＭＣ方法得到的离解反应速率与气体温度的关系曲线。     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

装备维修中备件需求率的预计方法

通过研究装备维修过程中器件的固有可靠性和维修性,着重分析了影响维修器件需求率的主要因素.利用系统建模和仿真的方法,分别针对耗损类型器件和可修复类型器件建立了相应的需求数学模型,最后给出了维修备件需求率的预计方法.     

速率陀螺解相遇与敌我态势的关系

根据敌我相对运动的原理,导出速率陀螺测量出的目标俯仰角速度Ω_s、测向角速度Ω_L 和探测器测出的距变率与敌我姿势要素间的关系,提出了距变率在极短时间内保持不变的条件;并利用Ω_s、Ω_L 和有关数据(qw,ε、D、■、V_w、K_w)推导出在不满足“快解”条件时计算目标运动要素和弹丸发射诸元的计算公式。     

高速核在高温热平衡等离子体中的非平衡弛豫过程对热核反应率参数的影响

高速核入射到高温热平衡等离子体背景中,由于入射核动能远大于背景等离体中带电粒子之平均动能,入射核在与背景等离子体达到热平衡之前,会存在一段逐渐损失能量的非平衡弛豫过程。本文以高速氘核入射到高温氘化锂等离子体为例,在计及氘核的这种非平衡弛豫过程时,给出了一种计算热核反应D(t,n)~4He之反应率参数的方法。氘核在弛豫过程中的能量损失考虑了氘核与各种带电粒子的库仑散射过程,其能量损失率采用快速带电粒子的慢化理论来计算;氘与背景等离子体中的原子核发生的核反应过程,考虑了非平衡状态下束靶机制的D(t,n)~4He反应和热平衡状态下的D(t.n)~4He反应。在暂未考虑核散射的情况下,计算结果表明,当等离子体温度在7.5KeV～20KeV范围内变化时,氘核的非平衡弛豫过程对热平衡状态下D(t,n)~4He反应率参数的修正因子大致在1.0062～1.0943范围内变动,且温度越高,修正因子越小。计算还表明,当温度一定时,修正因子随等离子体中粒子的数密度变化不明显。     

自适应均衡器非维纳效应的仿真研究

窄带干扰条件下,自适应滤波器产生非维纳效应。在分析非维纳效应产生机理的基础上,详细仿真研究了强单音干扰条件下,自适应均衡器的收敛和跟踪性能。通过研究得出了一些新的结论:多径和干扰的功率严重影响自适应均衡器的收敛速度,而干扰的频率对收敛速度几乎没有影响;固定的强单音干扰对自适应滤波器的信道跟踪性能影响较小;慢变的强单音干扰对跟踪性能影响较小,快变的单音干扰将对跟踪性能造成严重影响。